You are here:
Passive Fire Protection for housebuilders
You are here:
Passive Fire Protection for housebuilders
![](/wp-content/uploads/2024/04/house_default_state.jpg")
Mitigate fire spread risk with our housebuilders product range
The risk of fire spread exists when electrical and mechanical services are installed through walls, ceilings and floors or an open path within concealed cavities is left unprotected. This can result in a serious reduction in the fire resistance rating and the ability of the structure to limit and resist fire spread.
HOUSEBUILDERS
Compliance in construction
Tenmat passive fire protection products are designed to assist Housebuilders in addressing these issues and to meet the requirements of Building Regulations Approved Document B where it is stated that:
“Cavities in the construction of a building provide a ready route for the spread of smoke and flame, which can present a greater danger as any spread is concealed.”
“The performance of a fire-separating element should not be impaired. Every joint, imperfect fit and opening for services should be sealed.”
“Cavity barriers should be provided at… the junction between an external cavity wall and every compartment floor and compartment wall”.
Our stockists
Our range of passive fire protection products
Downlight Covers
Reinstates the fire resistance performance of ceilings and/or floor joist constructions.
FF102/50
Tenmat’s FF102/50, Ventilated Cavity Fire Barriers, are manufactured from a low smoke zero halogen high expansion intumescent material.
Fire Rated Ceiling Air Valves
A fire rated solution where recessed ceiling air valves are to be installed.
Pipe Fire Sleeves
The FF109 Pipe Fire Sleeves (PFS) is a range of passive fire protection penetration seals designed for fire-stopping around insulated metal and combustible plastic pipes.
Roof Tile Firestop
Tenmat’s RTF and RRF Roof Tile/Ridge are roof cavity firestop products and are manufactured from low smoke zero halogen intumescent material.
Socket Box Inserts
A simple fire and acoustic solution for protecting electrical switch and socket boxes.
Vent Duct Fire Sleeve LP
A family of CE Marked fire penetration seals designed to firestop PVC ventilation ducts/pipes when installed through fire rated constructions.
Resources
Contents
Covering Ventilated Fire Barriers, Lighting, Ventilation Service Penetrations, Mechanical Service Penetrations and Electrical Service Penetrations.
Product overviews
Product details
Product sizes