You are here:
Railko RG2 & RG12
Railko RG2 and RG12 are based on a woven fabric bonded with resin with the inclusion of a friction modifier.
You are here:
Railko RG2 & RG12
Railko RG2 and RG12 are based on a woven fabric bonded with resin with the inclusion of a friction modifier.
RAILKO RG2 & RG12
Resin-bonded woven fabrics
Railko RG2 and RG12 grades have the advantages of high-temperature capability, high compressive strength, high-pressure velocity, low friction, and low swell in fluids. The material is used as bushes, bearings, thrust washers and sliding pads.
Railko RG2S is the oil-impregnated version of Railko RG2 and is used as guiding elements and pressure guides for any type of bandsaw and resaw in the forestry industry. The friction-reducing additives significantly decrease the wear of blades and pads while being capable of running dry for longer periods, making it the preferred choice of material in sawmills worldwide.
Railko RG2 & RG12 at a glance
- High-temperature resistance
- High compressive strength
- High-pressure velocity
- Controlled friction
- Low swell in fluids
Availability
Railko RG2/RG12 is available in sheets and tubes. Railko RG2 is for flat products and Railko RG12 is for cylindrical products.
Railko RG12
Tube: Length: 610 mm
Minimum Inside diameter: Ø19 mm
Maximum Outside diameter: On request
Railko RG2
Sheet: Thickness: 2.4 – 75 mm
Sizes: 1220 x 1220mm
Resources
Contents
Low coefficient of friction
High wear resistance
High load capacity
Resistant to most chemicals, oils and greases